## Dust Stop - Environmental Dust Control & Soil Stabilization

__Dust stop application__

The typical dilution rate of the product is 1 lb. Dust Stop per 3 (US) gallons of water for a topical application and the typical application rate of Dust Stop should be 1 lb. of product per 6 square meters of treatment/surface area. Therefore 1 (US)gallon of diluted product treats 2 meters squared of treatment/surface area. When applying Dust Stop in a topical application please follow the steps outlined below:

- The first step is to calculate the area that will be covered by the Dust Stop application. To do so you will need to measure the length and the width of the road. Multiply the length by the width of the road to find out the total area that will be treated. For example, if your road is 6 meters wide by 1000 meters (1 km.) in length, the total treatment area will be 6000 square meters.
- Using the example above we can now calculate how much Dust Stop is required. Remember that the product is applied topically with water and that 1 gallon of water is used every 2 square meters. Therefore if calculating the treatment area in square meters, the amount of gallons of water required to apply Dust Stop would be the total treatment/surface area divided by 2, and the amount of Dust Stop required would be the total treatment/surface area divided by 6.
- 6000 square meters / 2 (gallons per square meter) = 3000 gallons of water
- 6000 square meters / 6 (lbs. of Dust Stop per square meter) = 1000 lbs. of Dust Stop